Software downloads

Software downloads

Configurator setup

CG Probe Configurator Setup 1.0.6

September 24, 2026

Download

CG Probe Configurator Setup 1.0.5

September 10, 2026

Download

CG Probe Configurator Setup 1.0.4

August 24, 2026

Download

Firmware

Cellular

cgprobe_cell_app_v2.0.7

September 23, 2026

  • Network: allow segmented reports when msize is below 11 bytes
  • Network: automatically reconnect MQTT when credentials change
  • Modem: escalate MQTT/PDP failures through a retry ladder before restarting the modem
  • Modem: fix network status snapshot and log AcT/iotopmode by name
  • Modem: fix stale MQTT state on reconnect

Download

cgprobe_cell_app_v2.0.6

September 10, 2026

  • Debug: log a summary of the report data
  • dsmr: Added A1 support
  • dsmr: support 32 OBIS codes
  • Mbus: scale the receive path with the baudrate and report collisions
  • Mbus: send NKE before a secondary scan and check which meter answered
  • Modem: Added MQTT connection status reporting

Download

cgprobe_cell_app_v2.0.5

July 10, 2026

  • io: use calibrated values for 10 V analog measurements
  • io: use VREF for analog measurements.

Download

LoRa

cgprobe_lora_app_v2.0.7

September 23, 2026

  • Network: allow segmented reports when msize is below 11 bytes
  • Lora: fix US915 join and data rate handling ->L
  • Lora: support LoRaWAN rejoin command ->L

Download

cgprobe_lora_app_v2.0.6

September 10, 2026

  • Debug: log a summary of the report data
  • dsmr: Added A1 support
  • dsmr: support 32 OBIS codes
  • Mbus: scale the receive path with the baudrate and report collisions
  • Mbus: send NKE before a secondary scan and check which meter answered

Download

cgprobe_lora_app_v2.0.5

July 10, 2026

  • io: use calibrated values for 10 V analog measurements
  • io: use VREF for analog measurements.

Download